Darfon

Hybrid%20Inverters

Refine Results:
Sort by:
T1 Gateway
The T1 gateway is an outdoor-rated unit with a built-in 200A ATS to support partial or whole home backup.
B17 17.5kWh LFP Battery
The B17 is a 17.5kWh high-voltage LFP battery. The high voltage design increases the conversion efficiency, lowers the current, and reduces the cable thickness.
H7 Hybrid Inverter
The H7, a 7.6kW outdoor-rated hybrid inverter, can replace an existing string inverter, be DC-coupled in a new PV system, or AC-coupled to an existing PV system.
H5001STK Hybrid Inverter
Stack two H5001STK for essential loads up to 14kW (8.8kW if grid is absent). If that is not enough, stack three for up 21kW with grid and 13.2kW without grid.
DL300 Data Logger
The DL300 Data Logger is the hardware connecting Darfon inverters with Darfon’s cloud-based monitoring portal.
B09ULF 9.6kWh LFP Battery
The B09ULF is a 9.6kWh battery that can be installed floor-standing or wall-mounted.
B12LF 12kWh LFP Battery
The Darfon B12LF is a 12kWh LFP battery cabinet, but if you need more, two B12LFs can be stacked for 24kWh of power.
B05LM 5kWh LNMC Battery
The B05LM is Darfon’s lightweight battery solution for its hybrid inverters.
HB51 Hybrid Inverter
The HB51 is an AC-coupled hybrid inverter that supports loads up to 5.5kW off-grid and 7kW grid-tied. The HB51 can be used for peak shaving, Backup and TOU.
G640 Microinverter
The G640 is a dual-input microinverter with just one AC connector. It is an economical solution for both residential and commercial systems.
ACRak 320 Solution
ACRak combines Darfon microinverters, IronRidge XR rails and trunk cabling to create an easy-to-install, out-of-the-box solution.
H200 Energy Storage System
The H200 is an energy storage solution for residential and small commercial systems. It integrates LiFePO4 batteries and the H5000 into an industrial rack.
H100 Energy Storage System
The H100 is an energy storage solution for residential and small commercial systems. It integrates lead acid AGM batteries and the H5000 into an industrial rack.
H5001 Hybrid Inverter
The H5001 is a DC-coupled hybrid inverter that can be used off-grid or grid-tied. The H5001 can support loads up to 5.5kW off-grid and 7kW grid-tied.
CB-100 PLC Box
The PLC Box is installed between microinverters and the service panel. It sends information from the microinverters to the Data Logger for data monitoring.
G320 Microinverter
The Darfon G320 microinverter combines of power and flexibility. It features a high reliability design and has an outstanding efficiency, THD and Power Factor.
Cloud-Based Monitoring
Darfon's Cloud-based monitoring system auto-detects installed microinverters, making set-up simple & easy.
MIG300 Microinverter
Darfon MIG300 microinverter has a nominal input power rating of 300W with a voltage range compatible with all conventional 60 and 72 cell modules.
DL-100 Data Logger
The DL-100 Data Logger is used in conjunction with the PCC100 PLC Box to provide monitoring for the MIG240 and MIG300 microinverters.
PCC100 PLC Box
The PCC100 PLC Box is used in conjunction with the DL-100 Data Logger to provide monitoring for the MIG240 and MIG300 microinverters.
HBB3000 Hybrid Inverter
Darfon HBB3000 hybrid inverter supports output up to 3000W and has user customizable settings to control where power is received and sent.
HBF Off-Grid Inverters
The HBF2000, HBF3000 and HBF5000 off-grid inverters have customizable user settings to control power flow from pv modules, the grid and batteries.
MIG240 Microinverter
Darfon MIG240 microinverter has a maximum input power rating of 260W and uses standard cabling that supports up to 25 units per 30A branch circuit.
ComBox
To make installation faster and easier for our installers, Darfon’s ComBox prewires the Data Logger and PLC Box into a junction box that is simple to install.
Total Products: 24 l Showing: 1 to 24 of 24
Back to Top